Non Dry Stamping Oil

A synthetic, highly fast dry evaporative forming and stamping fluid, specially developed for use on a variety of both ferrous and non-ferrous metals where a high level of part cleanliness is required. It provides the ultimate balance between lubrication and evaporation, protecting dies and punches whilst giving a virtually dry finished part. In the majority of cases parts may be powder coated or painted without resorting to time consuming parts cleaning or costly vapour degreasing.

Metal QuestPS-NO.40KPS-NO.51KPS-NO.52SPS-NO.48PS-NO.153
AppearanceYellowBrownLight YellowLight YellowYellow
Specific Gravity
(15/4℃)
0.880.850.810.9770.971
Viscosity
(cst at 40℃)
2.003.504.6028.00153.00
Flash Point
(c.o.c. ℃)
45.005048195.00>240
Copper Corrosion
(100℃ * 3h)
1a2c2a1a1a
Oiliness Improver9~20%9~20%3~9%3~9%>20%
Chlorine3~9%3~9%1~3%3~9%3~9%
Sulphur-<1%<1%--
Special Additives3~9%1~3%1~3%1~3%1~3%
HydrocarbonRestRestRestRestRest
Punchingt<3.0t<3.0t<2.0t<3.0
ApplicationGood for High Speed Stamping. Good for Copper Alloy.Very good for SUS stamping in high speed. Prolong punch & die life.Stamping oil for Steel, Carbon Steel and Stainless Steel on light duty.Stamping Oil for SUS